MIM Publications

Metal Injection Moulding Publications

1. “Metal Injection Moulding (MIM) of M2 High Speed Steel using a polyethylene based binder,” G. Herranz, B. Levenfeld, A. Varez, J.M. Torralba, J. Piemme, D. Heaney and R.M. German. Materials Science Forum, vols. 426-432. (2003) pp. 4361-4366.
2. “Variability of Powder Characteristics and their Effect on Dimensional Variability of Powder Injection Molded Components,” D. Heaney, R. Zauner, C. Binet, K. Cowan, and J. Piemme, Journal of Powder Metallurgy, v. 47, n. 2, 2004, pp 145-150.
3. “Variability of Feedstock Viscosity and its Effect on Dimensional Variability of Green Powder Injection Molded Components,” R. Zauner, C. Binet, D. Heaney, J. Piemme, Journal of Powder Metallurgy, v. 47, n. 2, 2004, pp. 151-156 .
4. “Mechanical Properties of Metal Injection Molded 316L Stainless Steel Using Both Prealloy and Master Alloy Techniques,” D. Heaney, T. Mueller, P. Davies, Journal of Powder Metallurgy, v. 47, n. 4, 2004, pp. 367-373.
5. “Isotropic Forming of Porous Structures via Metal Injection Molding,” D. F. Heaney, J. D. Gurosik, C. Binet, Journal of Material Science, Vol. 40, 2005, pp. 973-981.
6. “Qualification Method for Powder Injection Molded Components,” D. F. Heaney, P/M Science & Technology Briefs, Vol. 6, No. 3, 2004, pp. 21-27.
7. “Qualification Method for PIM Components,” Donald F. Heaney, International Symposium on Powder Injection Molding During the 2001 Materials Solutions Conference, November 5-8, 2001, Indianapolis, IN.
8. “Experimental and Numerical Analysis of Metal Injection Molded Products,”, C. Binet, D. F. Heaney, R. Spina, and L. Tricarico, submitted to Journal of Materials Processing Technology.
9. “Fuel Injectors, Sensors and Actuators Manufactured by Bi-Metal Powder Injection Molding,” Randall M. German, Donald F. Heaney, Lye-King Tan, and Robin Baungartner, 2002 SAE World Congress, March 4-7, 2002, paper # 2002-01-0343.
10. “Comparison of master alloy and pre-alloyed 316L stainless steel powders for Metal Injection Molding (MIM),” P. A. Davies, Donald Heaney andG. R. Dunstan, PM2TEC 2004 World Congress, MPIF, Chicago, IL.
11. “Ceramic Injection Moulding of Ni-Zn Ferrites using thermoplastic binder based on PP: Rheologycal study,”, Elena Rodríguez-Senín, Gemma Herranz, Donald F. Heaney, Alejandro Várez, Belén Levenfelda, Jose M. Torralba, PM2004, Vienna, Austria.
12. “Processing of Biocompatible Materials via Metal and Ceramic Injection Molding,” J.L. Johnson and D.F. Heaney, presented at ASM Materials and Processes for Medical Devices Conference, St. Paul, MN (August 25-27, 2004).
13. “Spoilt for Choice - Commercially Available Feedstocks for PIM,” D. Heaney, Metal Powder Report, v. 57, n. 6, June 2002, pp 32-33.